You are not connected. Please login or register

Phason Support Forum » Frequently asked questions (FAQs) » Omni Select & Dairy Select »  SELECT SORT: Animals are not sorting in the correct direction

SELECT SORT: Animals are not sorting in the correct direction

View previous topic View next topic Go down  Message [Page 1 of 1]

Possible causes

  1. The poweroff configuration does not match the hose connections on the solenoid.
  2. The scale head is using a different sort mode than you think it is.
  3. You are using auto-sort mode and market sort is still active.

Solutions

  1. Switch off the power to the scale head, leave the air pressure on, and observe each gate position. For any gate position that is not correct, swap the hose connections at the scale head.
    Change the poweroff settings in configuration on the computer to match the gate positions at the scale.
  2. Make sure the software is set to the sorting mode you want.
  3. Reset market sorting after you're done with market sort. If a market sort limit is active it will override the normal sort settings.

View user profile http://www.phason.ca

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum