You are not connected. Please login or register

Phason Support Forum » Frequently asked questions (FAQs) » All controls » Inlet actuator moves back and forth when it should be stopped

Inlet actuator moves back and forth when it should be stopped

View previous topic View next topic Go down  Message [Page 1 of 1]

Possible cause

  1. Actuator is out of calibration
  2. Inlet hysteresis is too low (Supra, PEC old style)

Solution

  1. Calibrate actuator. If this fails, see this post.
  2. Increase inlet position hysteresis.

View user profile http://www.phason.ca

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum