You are not connected. Please login or register

Phason Support Forum » Frequently asked questions (FAQs) » All controls » Display shows unusually high or low temperature

Display shows unusually high or low temperature

View previous topic View next topic Go down  Message [Page 1 of 1]

Possible Cause

  1. The probe is not a Phason probe
  2. The extension cable connected to the temperature probe is providing a poor connection
  3. Damaged probe or wire

Solution

  1. For MTC-3C/4C controls use MT-P3 probe.
    For all other controls use MT-P3A or B probe.
  2. Check the extension cable connection. Resolder it if necessary.
  3. Replace damaged wire or probe

View user profile http://www.phason.ca

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum